Friday, 7 February 2020

Falcon Premium Spiral Pad

Have those recycled papers hanging around? Some sort of plastic storage tub, and a kitchen blender? With a few supplies and these basic instructions, you’re well on your way to making handmade paper and being ridiculously friendly to the environment.

Keep reading for the tutorial! There’s an online recycled papermaking class, too!
Supplies for Making Paper

  • Water
  • Scrap Papers
  • Plastic storage tub or vat
  • Kitchen blender – get one from the thrift store
  • Mould & Deckle (a screen attached to a frame) How-to make a mould & deckle >
  • Wood boards OR sponge & rolling pin
  • Towels, wool blankets, cloth, pellon, Sham-wows, or other absorbent material

  • STEP 1: CUT UP PAPER

  • Cut or rip up your paper into about 1 inch squares.
  • Soak your paper for a few hours or overnight.


Drawing, printmaking, and watercolor papers are best because they are generally made from stronger fibers (such as cotton rag, and not chemically treated tree fiber). Your fiber/scrap choice and its characteristics dictate the quality of the final sheet.
However, experiment with junk mail, office paper, paper grocery bags, the yellow pages, rejection letters, and more. No plastic, people.
Also, experiment with different color combinations.Fill up a kitchen blender with water. Throw in a good handful or two of the cut up scrap papers (not too much more, or you’ll burn the blender motor out). Blend. Keep blending until it’s a pulp.
Don’t make your smoothies with that blender anymore.
Have a storage tub hanging around? Those concrete mixing vats from the hardware store also work. Fill up the tub with your blended pulp, about 1/3 to 1/2 way. Add more water to the vat. The more pulp to water, the thicker your paper will be.or this, you’ll need a mould and deckle. It’s basically two frames that are the same size, one with screen attached.
Learn how to make your own, the cheap & quick way! Click here for the DIY mould & deckle tutorial >





There’s also a list of papermaking suppliers who sell mould & deckles on our Resources page.


Now, for sheet formation:
  • Stir your vat of pulp.
  • Hold the mould screen side up, and place the deckle evenly on top.
  • Holding them together at a 45 degree angle, dip the mould and deckle to the bottom of the vat and scoop up, holding the mould and deckle horizontally.
  • As you lift it out of the slurry, give it a quick shake back and forth, and left to right to align the fibers and make a more uniform sheet. Stop shaking before the sheet is fully drained.
  • Let the water drain to a drip.Couching’ means to transfer the wet sheet from the mould to a flat, absorbent surface. Wool felts are ideal, but there are many other options: wool blankets, smoother towels, thick paper towels, non-fusible interfacing or pellon, sham-wows, or bed sheets. Set up your felt with a board underneath and soak your couching materials.
    • Remove the deckle from the mould.
    • Place a long edge of the mould on the felt.
    • In one smooth motion, place the mold face down, press down, and lift from that initial edge. Think of this like a close the door, open the door, motion.

    STEP 5: PRESSING
    Option 1: Hand Pressing click here
    Place pellon or paper towel on top of your freshly couched sheet. With a sponge, press gently at first, then press firmly with as much pressure as possible. Have a rolling pin or old paint roller? Use that to press your paper even more.

0 comments:

Post a Comment